ceiling grid cold forming machine manufacture/ceiling grid cold former
T grid38*24
ceiling grid cold forming machine manufacture/ceiling grid cold former
Ceiling System T Grid Cross Tee Roll Forming Making Machine is used to make ceiling T-bars. The T-bar is a technical profile for supporting suspended ceiling panels (cell grid suspended ceiling). This highly technical system consists of two different profiles called Main Tee and Cross Tee. A galvanized sheet metal base gives structure and strength to the profile, but all that can be seen once the ceiling is assembled is a pre-painted sheet metal profile. Special machining and hooks or connectors are to be found on the profile body and the ends, which allow the profiles to be fastened to the ceiling and to each other. These materials are widely used in the buildings now, such as office buildings and schools, etc.
Ceiling System T Grid Cross Tee Roll Forming Making Machine is used to make ceiling T-bars. The T-bar is a technical profile for supporting suspended ceiling panels (cell grid suspended ceiling). This highly technical system consists of two different profiles called Main Tee and Cross Tee. A galvanized sheet metal base gives structure and strength to the profile, but all that can be seen once the ceiling is assembled is a pre-painted sheet metal profile. Special machining and hooks or connectors are to be found on the profile body and the ends, which allow the profiles to be fastened to the ceiling and to each other. These materials are widely used in the buildings now, such as office buildings and schools, etc.
Quantity
ceiling grid cold forming machine manufacture/ceiling grid cold former /ceiling grid cold forming machine manufacture used
Ceiling T grid system machine details are as below:
| Decoiler | Weight | 150kg |
| Steel coil ID | 450~550mm | |
| Steel coil OD | 1500mm | |
| Roll Forming Machine | Rollers | 14~18 Rows |
| Material: Cr12 | ||
| Inner diameter: 40mm; Outer diameter: 90mm | ||
| Heat treatment hardness:HRC58-62℃ | ||
| Transmission | The main drive uses worm gear transmission | |
| Middle Plate | Thickness is 25mm | |
| Hydraulic System | Power | 7.5KW |
| Cutting System | Servo Tracking System | 2.2KW |
| Punching | Material | SKD11 |
The features of False Ceiling T Bar Machinery
Three False Ceiling T Bar Machinery are included in full line as below:the main T grid bar roll forming machine
cross Tee grid bar roll forming machine
and wall(L)angle roll forming machine
False Ceiling T Bar Machinery are built according to Client's specifications, because of this, we can make the Ceiling T grid system machine’s perfect performance and long lifetime.
Meet clients' diversified requirements
Ceiling T grid system machine with reasonable price, therefore, do not worry anything!
Responsible QC workers check every process, in conclusion, we will try our best to serve our clients.
Lower labour cost, convenient transportation and fully automatic save your money!
We not only develop PLC by ourselves to ensure high accuracy but also make suspended ceiling t bar equipment’s punching moulds by ourselves T grid Machine factory. So we promise the after-sale service.
In addition to this, It is also Easy to operate ceiling T-grid machinery. Above all, It will be your best choice to choose the T grid Machine factory!
Cross suspended ceiling t bar equipment
suspended ceiling t bar equipment is built according to Client’s specifications, using top brand component
Meeting clients’ diversified requirements on machines.
Ceiling T grid system machine with reasonable price.
Every process will be checked by responsible QC which insures every product’s quality.
Low labour cost, convenient transportation and fully automatic save your money from every part! Self-developed PLC Ensures high accuracy and is easy to operate!
Specification for Ceiling T grid system machine
| Decoiler | Weight | 150kg |
| Steel coil ID | 450~550mm | |
| Steel coil OD | 1500mm | |
| Roll Forming Machine | Rollers | 14~18 Rows |
| Material: Cr12 | ||
| Inner diameter: 40mm; Outer diameter: 90mm | ||
| Heat treatment hardness:HRC58-62℃ | ||
| Transmission | The main drive uses worm gear transmission | |
| Middle Plate | Thickness is 25mm | |
| Hydraulic System | Power | 7.5KW |
| Cutting System | Servo Tracking System | 2.2KW |
| Punching | Material | SKD11 |
Application
Our Machine Suppliers
Shipping Package & Container
High speed full automatic suspended Ceiling T grid tee bar machinery production line's Punching Mold
